First of all, we need to know that brass nuts can be roughly divided into four types: ultrasonic/hot melt embedded nuts; Cold pressing embedded nut; Self-tapping embedded nuts and injection molded embedded nuts. Each nut category is suitable for different materials. Hot melt embedded nuts are suitable for thermoplastic plastics (e.g. PPS, ABS, PP, etc.); Cold-pressed embedded nuts are also suitable for thermoplastic plastics, including several cold-pressed nuts (MB/MBH barbed cold-pressed nuts; DL type conical slotted cold-pressed nut with gasket) is also suitable for thermosetting plastics. Self-tapping embedded nuts and injection molded embedded nuts are suitable for both materials (thermoplastic and thermosetting).
PS: Thermoplastics It refers to plastics (such as ABS, PP, POM, PC, PS, PVC, PA, PMMA, etc.) that can be softened and hardened by repeated heating within a specific temperature range and can be recycled.
Thermosetting plastics It refers to plastics (such as phenolic resin, epoxy resin, and so on) that become non-melting substances after being heated, no longer have plasticity, and cannot be recycled after being heated again. Amino resin, polyurethane, Foamed polystyrene Etc) .
Installation Demonstration of Cold Pressure Nut (as shown in the following figure)-Installation Demonstration of Slotted Cold Pressure Nut
Installation Demonstration of Cold Pressure Nut (as shown in the following figure)-Installation Demonstration of FS/SP/GT/BL/MB Expansion Type and Barbed Type Cold Pressure Nut
Demonstration of Injection Nut Installation (as shown in the following figure)
Demonstration of self-tapping nut installation (as shown in the following figure)
These are the four common installation methods of copper nuts. If you don't understand or don't know which method should be adopted, you can contact our company. Our project will give you the most professional and cost-saving suggestions.
Shenzhen Lifan Precision Hardware Co., Ltd. Focuses on the production and processing of hardware spare parts and fastener connectors, adhering to the enterprise philosophy of "reaching the highest quality and casting with heart" and always adhering to the principle of "taking root in the basic industrial field and serving global customers".