Surface mount bracket fastener

Quick, convenient assembly using standard tools Installation of self-clinching nuts is simple, quick, and convenient. Just insert them in punched or drilled holes, then apply a squeezing force to embed the clinching ring completely in the sheet me...

Type LSFW self-clinching fastener creates a permanent, flush joining of two sheets of metal. The fastener installs smooth with the top sheet, and flush or sub-flush with the bottom sheet. Common specification: LSFW-3 0.8 Special materials and...

LH LHN LHNL steel pressure nut Two types of load-bearing threads, self-locking and non-self-locking, are provided on the thin plate. Provides standard profile load bearing internal threads in sheets as thin as .025″ / 0.64 mm. Common specificat...

Fasteners for LKFE/LKFSE PCB Internal threaded fasteners mounted on the PC board to tightly connect the flower teeth with the panel are used to assemble the PCB board and provide support columns with/without threads for the PC board. Common Specif...

LSMTSO nuts surface mount nuts and standoffs are available threaded and unthreaded. Benefits include: faster assembly, reduced scrap & handling, and reduced risk of board damage from improperly installed fasteners. Common Specifications: LSMTSO-4...

LKSSB-PC Card Sliding Riveting Stud Spacing the PCB board from other boards or metal boards, only the board needs to be buckled on the column; Common Specifications: LKSSB-156-10 Special materials and specifications can be customized on demand.

Install permanently in all types of PC boards, as well as aluminum, acrylic, casting and polycarbonate components. Types LKF2 and LKFS2 broaching nuts are internally threaded for mounting on PC boards.Common specification: LKF2-832 Special materi...

LSKC-F double panel fastener LSKC-F fasteners can permanently secure metal to PCB/plastic panels. The fastener has two separate connection profiles. Extruding the fastener into place will cause the metal panel material to cold flow into the crimp ...

Type LSFK fasteners create a permanent, flush joining of metal to PCB/plastic panels. The fastener has two separate joining profiles. Squeezing the fastener into place causes a cold-flow of the metal panel material into the fastener’s clinch profi...

Type LSFP self-clinching fastener creates a permanent, flush joining of two sheets of metal. The fastener installs smooth with the top sheet, and flush or sub-flush with the bottom sheet. Common Specifications: LSFP-3/LSFP-5 Special materials...

LSF double panel fastener Material: Carbon Steel 1215 Application field: Applied to the permanent connection between two similar or different metal plates It can also be applied to single-point location connection, but this connection method is...

LSKC press riveting stud standoffs are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. Type LSKC can be used for spacing or hanging o...

LSSA/LSSS/LSSC riveting studs standoffs use a spring action to hold PC boards and subassemblies securely, while allowing for quick removal. Screws and other threaded hardware are eliminated. Common Specifications: LSSA-156-8/LSSS-156-12 Special...

Blind, Threaded – Types LBSO,LBSOA, LBSOSThese standoffs are designed for spacing applications where outer sheet surfaces must be flush and closed for smoother sheet appearance. It is used on the chassis or circuit board to play a role of spacing...

Thru-hole, Threaded and Unthreaded- Types LSO, LSOA, LSOSbrand thru-hole threaded standoffs are installed with their heads flush with one surface of the mounting sheet. Unthreaded standoffs are also available for spacing multi-panel assemblies. C...

Thru-hole, Threaded and Unthreaded- Types LSO4brand thru-hole threaded standoffs are installed with their heads flush with one surface of the mounting sheet. Unthreaded standoffs are also available for spacing multi-panel assemblies. For mounting...

Thru-hole, Threaded and Unthreaded- Types LSO, LSOA, LSOSbrand thru-hole threaded standoffs are installed with their heads flush with one surface of the mounting sheet. Unthreaded standoffs are also available for spacing multi-panel assemblies. C...

Concealed Head Standoffs – Types LCSOS, LCSSself-clinching concealed-head standoffs install permanently in steel or aluminum sheets as this as .062″ / 1.6mm. This feature allows the side of the sheet opposite installation to remain smooth and unto...

Thin Sheet, Thru-Hole – Types LTSO, LTSOA, LTSOS,Types LTSO, LTSOS, LTSOA self-clinching threaded standoffs provide permanent threads in sheets as thin as .025 ” / 0.63 mm. Common Specifications: LTSO-256-125/LTSO-440-250 LTSOS-M2.5*0. 45-200/L...