Close To Edge – Types LDSO, LDSOSTypes LDSO and LDSOS standoffs are available for close-to-edge applications.Minimum thread size: M1.0/# 0-80. Minimum length: 1 mm/. 040 in. Minimum paper thickness: 0.3 mm/0.012 in. Maximum hardness: HRB 88. F...

LSKC press riveting stud standoffs are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. Type LSKC can be used for spacing or hanging o...

LSSA/LSSS/LSSC riveting studs standoffs use a spring action to hold PC boards and subassemblies securely, while allowing for quick removal. Screws and other threaded hardware are eliminated. Common Specifications: LSSA-156-8/LSSS-156-12 Special...

Blind, Threaded – Types LBSO,LBSOA, LBSOSThese standoffs are designed for spacing applications where outer sheet surfaces must be flush and closed for smoother sheet appearance. It is used on the chassis or circuit board to play a role of spacing...

Thru-hole, Threaded and Unthreaded- Types LSO, LSOA, LSOSbrand thru-hole threaded standoffs are installed with their heads flush with one surface of the mounting sheet. Unthreaded standoffs are also available for spacing multi-panel assemblies. C...

Thru-hole, Threaded and Unthreaded- Types LSO4brand thru-hole threaded standoffs are installed with their heads flush with one surface of the mounting sheet. Unthreaded standoffs are also available for spacing multi-panel assemblies. For mounting...

Thru-hole, Threaded and Unthreaded- Types LSO, LSOA, LSOSbrand thru-hole threaded standoffs are installed with their heads flush with one surface of the mounting sheet. Unthreaded standoffs are also available for spacing multi-panel assemblies. C...

Concealed Head Standoffs – Types LCSOS, LCSSself-clinching concealed-head standoffs install permanently in steel or aluminum sheets as this as .062″ / 1.6mm. This feature allows the side of the sheet opposite installation to remain smooth and unto...

Thin Sheet, Thru-Hole – Types LTSO, LTSOA, LTSOS,Types LTSO, LTSOS, LTSOA self-clinching threaded standoffs provide permanent threads in sheets as thin as .025 ” / 0.63 mm. Common Specifications: LTSO-256-125/LTSO-440-250 LTSOS-M2.5*0. 45-200/L...

Install Into Stainless – Types LBSO4Types LBSO4 and LSO4 standoffs are for installation into stainless steel sheets as thin as .040 ” / 1.02 mm. For mounting on a stainless steel substrate; Common specifications: LBSO4-440-10/LBSO4-M3*0. 5-6 ...