LFH/LFHS/LFHA flat head press rivet bolt Platform bolts applied in plates with a thickness of 0.40 '/1mm or more; Common Specifications: LFH-440-5/LFHS-256-6 LFHS-M2.5-6/LFHS-M4-8 Special specifications and materials can be customized on demand.

LTPS pressure riveting guide pin Flush-head pilot pins satisfy a wide range of positioning, pivot, and alignment applications. The chamfered end makes mating hole location easy. Common Specifications: LTPS-125-8/LTPS-187-6 LTPS-250-6/LTPS-250-8...

Aluminium and stainless steel press riveting screws Suitable for installation in polished blind holes; Common Specifications: LCHA-440-4/LCHC-632-6 LCHA-M3-6/LCHC-M4-6 Special specifications and materials can be customized on demand. Rivet...

LHFH/LHFHS/LHFHB high strength press rivet bolt Heavy duty studs are designed with an enlarged head diameter which projects above the sheet metal and provides maximum pull through in sheets as thin as .040″ / 1mm. Common Specifications: LHFH-032-...

LFH4/LFHP press rivet bolt One of the very basics of self-clinching is that the fastener must always be harder than the host sheet to ensure proper and permanent installation. Threaded types LFH4, LFHP and unthreaded type LTP4 are specifically des...

LFH/LFHS/LFHA Flat Head Pins Available in steel, aluminum and stainless steel, PEM standard flush-head studs are designed to be installed in sheets as thin as .040″ / 1 mm. Common Specifications: LFH-073-6/LFHS-084-6/LFHA-094-6 Special material...

Thin Sheet, Non Flush-Type LTFH/LTFHSThin sheet studs are for sheets as thin as .020 inches / 0.51 mm. They may also be used in thicker sheets where flush head studs are not required. LTFH studs are installed in the sheets in the same manner as fl...

LHFE press rivet bolt The clinch design provides high-strength in sheets as thin as .031″ / 0.8 mm. The enlarged head diameter reduces stress on the panel and the thicker head allows for a larger hole in the attached panels. The LTHFE is recommend...

LFHL/LFHLS flat head press rivet bolt Flush, low-displacement head studs install closer to the edge of a sheet than Types LFH/LFHS studs without causing that edge to bulge. Common Specifications: LFHL-440-8/LFHL-256-4 LFHL-M3.5-6/LFHL-M3-6 Sp...