Material: Steel a) Malleable cast iron GT: GTS or GTW at the discretion of the manufacturer; b) Forging or cold working at the discretion of the manufacturer; c) Copper-zinc alloy CuZn: wrought alloy or cast alloy at the discretion of the manufact...
Metric DIN 128 Spring Lock Washers are specialty spring lock washers – Both are split metal rings that are bent into a curved or waved configuration. The DIN 128 lock washers are non-directionally specific allowing the screw and or nut to be tight...
Material: Stainless steel The thread is deep, and the thread is neat and clear, and the force is even and not easy to slip. No burrs and very convenient to use Antioxidant in humid environments
Metric DIN 7985 are cross recessed raised cheese head (Pan Head) machine screws. Machine screws are externally threaded fasteners designed to be mated with threaded nuts or tapped holes in the parts they are designed to hold together. DIN 7985 cr...
Metric DIN 7983C is a cross recessed raised countersunk (oval) head tapping screws. These screws are designed to cut threads into pre-drilled untapped holes of the substrate into which they are screwed. The recommended pilot hole sizes vary,depend...
DIN 7982 flat head self-tapping sheet metal screws Metric DIN 7982C Cross Recessed Flat Countersunk Head Self-Tapping Sheet Metal Screws are designed to cut threads into pre-drilled untapped holes of the substrate into which they are screwed. The ...
Metric DIN 7981C is a pan head self-tapping sheet metal screws These screws are designed to cut threads into pre-drilled untapped holes of the substrate into which they are screwed. These screws are available in zinc plated steel as well as stainl...
Metric DIN 6334 Hexagon Coupling Nuts also known as extension nuts are elongated fully threaded hex nuts that often used to join two externally threaded fasteners usually threaded rods. DIN 6334 metric hex nuts have a height of 3 x the major diame...
Material is available in carbon steel, stainless steel and others. Two ends are L H thread and RH thread with 6H tolerance. Finish is white Zinc plated, HDG, slef- color.
Material: Steel DIN 984 Similar in design to the DHO internal ring, this features several “teeth” equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applicat...
Material: Steel a) Strength class (material): 8,10,12 standard DIN ISO 898-2, DIN 267-23 b) Stainless steel, strength class (material): A2-70 standard DIN 267-11
DIN 970 Hex Nut, style 1 by Material, Finish and Size Finished Hex nuts are hexagonal, internally threaded fasteners, mated with bolts, studs, screws, and other externally threaded products. The purpose of a hex nut is to ensure that the bolt, etc...
Metric DIN 95 Oval (Raised Countersunk) Head Slotted Wood Screws are the preferred fasteners used to attach wood to wood or hardware to wood. Metric DIN 471 External Retaining Rings (aka circlips) are thin, circular, metal stampings that are used...
Material: Steel - Tensile strength class 5 - Visible surface finishing - blackened - Galvanized, blue passivated ZB Knurled nuts DIN 466 are suitable for universal use and can be tightened or loosened without tools. M12 threaded nuts other than t...
Material: Steel, Stainless Steel 1. Tensile strength grade 5 2. Visible surface finishing 3. Blackening treatment 4. Galvanized, blue passivated ZB DIN 464 knurled screws are produced entirely from a single piece. Screw covered with full length D...
Unlike the commonly used materials for general nuts, the key plastic material of wing screws is nylon 6/6. This unique material gives wing nuts a unique main purpose. Butterfly anchor bolts have high-quality features such as insulating layer, non-...