The minimum margin is the distance from the circular edge of the hole to the edge of the workpiece.If the hole is too close to the edge of the plate, ...

Inch nut refers to the nut size with the imperial system mark, according to the shape of cylindrical, conical two; according to the tooth angle is 55 ...

High strength bolt manufacturer, will discriminate and dissect the surface treatment of imperial nuts. How to distinguish the quality? The main thing ...

Press-fit and hot-melt nut insertion of plastic Hot-melt nut insertion methodsHot melt implantation is a common method of implanting nuts, generally b...

We all know that we will undergo multiple processing heat treatments, so what are the specific heat treatments that may be used? Below, we briefly exp...

The bolts made of stainless steel rust when the heat exchanger is working at a normal temperature of 1000°F (approx. 283°C)! Why is this? It turns out...

How are spring-loaded panel screws machined?How do you assemble a spring-loaded panel screw like the ones we offer, which are made up of three or four...

Stainless steel hexagonal bolts are the most commonly used bolts in the stainless steel fastener series, and need to be used in conjunction with the n...

Locking problems and solutions of stainless steel screws What does lockout mean? Lockout, also known as bite, refers to the bolt and the nut in the fa...

Stainless steel nuts we are also called stainless steel nuts, mainly used with 304 stainless steel bolts or screws screwed together to play a reinforc...

Inch nut is the size of the nut with the imperial system marked, according to the shape of the cylindrical, conical two; according to the tooth angle ...

High strength bolt manufacturers, will identify and dissect the surface finish of the imperial nuts. How is the quality distinguished? The main thing ...